Guide ยท 7 min read
PNG to STL for Logos, Keychains and Signs
Most PNG to STL jobs end up as one of four things: a keychain, a desk or door sign, a badge, or a fridge magnet. Each has a sweet spot for size and thickness, and getting those numbers right matters more than any converter setting. This guide gives you the dimensions that work, using the converter on our home page. If what you actually have is a photo of a real object rather than flat artwork, a flat extrusion won't do it; that is a job for FurniMesh's image to 3D generator, covered in our logo to product model guide.
The anatomy of a flat print
Every extruded logo has three numbers: the overall width, the plate thickness and the raised height of the artwork. Our converter calls them Width, Base plate thickness and Extrusion height, with defaults of 60 mm, 2 mm and 3 mm, plus a 3 mm margin of plate around the artwork. Those defaults suit a large keychain or a small badge. For anything else, change them before you download, because scaling a finished STL in the slicer also scales the plate and the raised height, which is rarely what you want.
Two rules apply to all of them. First, the thinnest line in your artwork must stay at least 0.8 mm wide after scaling, or a 0.4 mm nozzle will drop it; our thin features guide explains why. Second, heights should be multiples of your layer height. With 0.2 mm layers, a 2 mm plate is exactly 10 layers and a 1.6 mm logo is exactly 8, which keeps the top surface crisp and makes a color change land on a clean boundary.
Sizes that print well
The table below collects starting points for common projects in PLA with a 0.4 mm nozzle. They are not laws; they are numbers that balance stiffness, print time and detail.
| Project | Width | Plate | Raised height | Margin | Thinnest line |
|---|---|---|---|---|---|
| Keychain | 40 to 50 mm | 2 mm | 1.5 to 2 mm | 2 to 3 mm | 0.8 mm |
| Badge or pin | 30 to 40 mm | 1.6 mm | 1.2 mm | 1.5 mm | 0.8 mm |
| Fridge magnet | 50 to 70 mm | 3 mm | 1.5 mm | 3 mm | 1 mm |
| Desk sign | 150 to 200 mm | 3 mm | 2 to 3 mm | 5 to 8 mm | 1.2 mm |
| Door or wall sign | 200 to 250 mm | 3 to 4 mm | 2 to 3 mm | 8 to 10 mm | 1.5 mm |
| Cookie-cutter outline | 60 to 90 mm | off | 12 to 15 mm | none | 1.2 mm |
The fridge magnet plate is thicker so you can recess a magnet into the back. A common 10 x 2 mm disc magnet needs a pocket about 10.2 mm wide and 2.2 mm deep, which you can cut with a cylinder in your slicer's modifier tools, leaving 0.8 mm of plastic in front.
Worked example: a 45 mm keychain
Say your PNG is a 900 x 600 pixel logo with a transparent background. Drop it into the converter, leave the source on Auto so it reads the alpha channel, and set Width to 45 mm. Because transparent margins are trimmed first, 45 mm is the width of the logo itself. The plate adds the margin on each side, so with a 2.5 mm margin the finished tag is 50 mm wide.
Next, check the thinnest stroke. If the narrowest line in the logo is 12 pixels wide in the 900-pixel image, it scales to 12 x 45 / 900 = 0.6 mm. That is under the 0.8 mm floor, so you have two options: thicken the stroke in an image editor to 16 pixels or more (0.8 mm), or raise the width to 60 mm, where 12 pixels becomes 0.8 mm. The PNG preparation guide shows how to thicken strokes without redrawing.
Set the plate to 2 mm and the extrusion height to 1.6 mm, keep Smooth edges and a detail of 200 samples. The readout shows the final size, about 50 x 35 x 3.6 mm for this logo, along with the triangle count. Download, slice with 0.2 mm layers and insert a filament change at 2.0 mm. The first ten layers print in your plate color and the logo in the second color.

Where the keyring hole goes
A keychain needs a hole, and there are two clean ways to get one. The first works entirely inside the PNG. Draw a solid tab or circle where the ring should go, then erase a transparent circle in the middle of it, 4 to 5 mm across at the final size. Turn the base plate off in the converter. Now the artwork itself is the tag, and the transparent circle becomes a hole that goes straight through, with walls built automatically. Leave at least 2 mm of solid plastic around the hole, or the ring will tear it out.
The second way keeps the base plate on and cuts the hole afterward. Most slicers can subtract a cylinder from a model, and every CAD tool can. This is better when your logo has no natural spot for a tab, because you can place the hole in the plate margin. Make the margin at least 7 mm on that side so the hole has material around it, which means widening the margin setting or adding the tab in the PNG.
Signs: bigger is easier, but watch the warp
Desk and door signs are forgiving about detail, because a 1.2 mm stroke on a 180 mm sign comes from a fairly thin line in the original. The challenge is flatness. A 200 mm plate of PLA can lift at the corners if the bed is cool or drafty. Use a 3 to 4 mm plate rather than 2 mm, a brim if your slicer offers it, and an enclosure or a draft-free room for PETG and ABS. Raised letters of 2 to 3 mm read well from across a room; anything taller mainly adds print time.
For text, use a bold or semi-bold font. Thin serif fonts lose their serifs at almost any sign size, and script fonts with hairline connections break into separate letters. If the sign will sit outdoors, PETG or ASA hold up to sun and heat far better than PLA.

Smooth or pixel edges for logos
For nearly every logo and sign, keep Edges on Smooth. Marching squares places the outline between samples, so curves and diagonal strokes come out clean. Pixel blocks is for artwork that is meant to look like pixels: game sprites, retro icons, pixel fonts. With Pixel blocks, set the detail so one sample matches one original pixel, for example 64 samples across for a 64-pixel sprite (the slider starts at 40, so scale a smaller sprite up by a whole number first), and the print will show crisp square steps.
Got a PNG ready? Turn it into a watertight STL right now. It never leaves your browser.
Open the converterBefore you slice
Run through a short checklist. Is the thinnest feature at least 0.8 mm at the final width? Are the plate and raised height multiples of your layer height? Is there at least 2 mm of material around any hole? Does the preview show any stray specks from JPEG noise or anti-aliasing fringes? If you see specks, raise the threshold a little or clean the PNG. Then download and print a small test at 50% width first if the design is new; a 20-minute test costs less than a failed three-hour sign.
Questions
How thick should a 3D printed keychain be?
A 2 mm plate with a 1.5 to 2 mm raised logo, about 3.5 to 4 mm in total, is stiff enough for daily use in PLA or PETG. Below about 1.6 mm the plate starts to flex and can snap at the keyring hole.
How do I add a keyring hole to a PNG keychain?
Either paint the hole into the PNG as a transparent circle inside a solid tab and turn the base plate off, so the hole goes straight through, or export with the plate and cut the hole in your slicer or in a CAD tool with a cylinder modifier. A 4 to 5 mm hole fits standard split rings.
What layer should I change color at for a two-color sign?
Pause or change filament at the first layer above the base plate. With the default 2 mm plate and 0.2 mm layers, that is the start of layer 11. Most slicers let you insert a color change at a height in their preview.