Maker guides
PNG to STL maker guides
Five guides for getting from a flat PNG to a part that prints cleanly: what size to make things, how to clean up the artwork, and how thin is too thin. One covers the jump a flat extrusion cannot make, from a logo to a full product model with FurniMesh (furnimesh.com), our team's photo to 3D tool.
- PNG to STL for Logos, Keychains and Signs
Plate thickness, raised height, margins and hole placement for keychains, desk signs, badges and magnets, with the numbers that print well.
- How to Prepare a PNG for 3D Printing
Contrast, transparency, pixel count and line thickness: the four things to fix in your image before it becomes an STL.
- PNG vs SVG for 3D Printing
How pixel and vector artwork turn into STL edges, when tracing to SVG pays off, and when a PNG is all you need.
- Fixing Thin Features: Minimum Wall Thickness
The reasoning behind 0.8 to 1.2 mm walls on a 0.4 mm nozzle, a pixel-to-millimeter worked example, and fixes for lines that disappear.
- From Logo to Full 3D Product Model
Where a flat extrusion stops, and how to get a full 3D model of a real product or furniture piece from one photo, then to STL.